Info about wt88047 | LineageOS Wiki

Note: This page is auto-generated for the Wingtech Redmi 2, based on the device’s information, located here. You can find similar instructions for every officially-supported device on this wiki.

Get LineageOS for the Wingtech Redmi 2

Get the builds here

Installation

How to install LineageOS on the Wingtech Redmi 2

Build guide

How to build LineageOS for the Wingtech Redmi 2

Special boot modes

Recovery: Hold Volume Up, Volume Down and Power buttons simultaneously. Continue to hold both buttons until the “MI” logo appears on the screen, then release.
Download: Hold Volume Down and Power buttons simultaneously. Continue to hold both buttons until the word “FASTBOOT” appears on the screen, then release.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

Wingtech Redmi 2 (wt88047)

Released	2015 January
Specifications
SoC	Qualcomm MSM8916 Snapdragon 410
RAM	1/2 GB
CPU	Quad-core Cortex A53 1.2 GHz
Architecture	arm
GPU	Adreno 306
Network	2G bands: 900 1800 1900 MHz GSM 3G bands: 850 1900 2100 MHz HSDPA 4G bands: 3(1800) 7(2600) 38(2600) 39(1900) 40(2300) 41(2500)
Storage	8/16 GB
SD card	up to 32 GB
Screen	720 x 1280 (312 PPI) IPS LCD
Bluetooth	v4.0 with A2DP, LE
Wi-Fi	802.11 b/g/n, Wi-Fi Direct, Hotspot
Peripherals	Accelerometer Gyroscope Proximity sensor Compass Dual SIM GPS
Cameras	2 8 MP, LED flash 2 MP, No flash
Dimensions	134 mm (5.28 in) (h) 67.2 mm (2.65 in) (w) 9.4 mm (0.37 in) (d)
Battery	Removable Li-Po 2200 mAh
LineageOS info
Maintainers	nicknitewolf
Supported versions	14.1